Introduction of the daily maintenance of Frame PVC Farming Tank
The maintenance of the PVC farming tank is mainly reflected in two aspects, the maintenance of the steel frame and the maintenance of the pvc liner. The steel frame is usually wiped with a damp cloth to prevent the steel frame from peeling off the paint and rusting.
The maintenance of pvc liner is reflected in the use of the daily water treatment cycle system to keep the water in the PVC farming tank clean; after using it every quarter, wipe off the green moss at the bottom of the tank, dry it and pack it into the warehouse.
WOLIZE PVC Liner repair steps:
1. Drain the water in the collapsible fish tank, and then release the gas in the edge air chamber for cleaning.
2. Cut out the patch. The repair piece should be cut to 3 times the size of the repaired area, preferably round or oval.
3. First apply the primer. Wipe the area to be repaired and the repair piece clean, apply special glue evenly, and then blow it with a hair dryer until it is not sticky, or it can be air-dried naturally.
4. Repair glue treatment. Apply the special glue evenly to the repaired area and the patch that has just been wiped clean, and treat it as above until it is not sticky.
5. Sticky. Aim the repair piece at the repaired area, stick it slowly from one side, be careful not to generate air bubbles, and then press it flat with your hands.
6. Press firmly. After sticking, put it on a flat hard object, add a flat hard weight on it, and press it until it can be used after 24 hours.
5. After use, rinse the water storage bag, and after drying, fold it up and place it indoors to avoid sunlight.
