Brief introduction of PVC water storage bag

In places such as drought or fire emergency, many people use machine-mounted vehicles to transport water, which makes the safety performance of the modified vehicles worse, and the cost is high, and water is easy to leak during transportation, causing a lot of waste and waste. loss. In order to reduce the cost of phosphorus and lead and increase safety, pvc soft water storage bags came into being.

Features:

The PVC water storage bag is easy to transport, especially suitable for hilly and mountainous areas. The use is less affected by seasonal factors, and it can be folded and stored without trying to reduce the amount of space occupied. The water storage bag has good sealing and corrosion resistance, and has the characteristics of corrosion resistance, acid and alkali resistance.

Instructions:

1. Spread out the water storage bag and put it where it is needed. Be careful not to have sharp things to avoid damage.

2. In order to prevent the water storage bag from rolling, it can be reinforced around the water storage bag when it is placed. It is better that the reinforcement will not scratch or damage the water storage bag.

3. Use a water pump or tap water, connect the water pipe to the water inlet valve of the water storage bag, open the water inlet pipe valve and the exhaust valve switch, and remove the air in the water bag. Start water injection, and after the water bag is full, close the water inlet pipe valve and the exhaust valve.

4. When using a water storage bag, if the bag body is scratched, use a grinding wheel or a wooden file to smooth it out, and apply water to cover it with adhesive tape to repair it. It is best to use the watering repair recommended by the manufacturer.

5. After use, rinse the water storage bag, and after drying, fold it up and place it indoors to avoid sunlight.